• Channel ID is a label to name a channel. You may enter up to 19 characters.
• Instrument ID is a label. You may enter up to 19 characters.
• Operator ID is a 3 character label.
• Units of measure may be lbs, kgs, grams, or ounces. Weight is displayed in the chosen units. The units of measure may be changed without re-calibration.
• Grad size defines the increment between displayed weight readings.
• Decimal point defines the number of digits shown to the right of the displayed weight.
• Number of Averages is the number of weight readings averaged together to create the displayed weight.
• Motion tolerance defines the size of the 1 second weight jump that make the scale go into MOTION status. The scale cannot be calibrated, tared, or zeroed while in motion.
• Tare weight is the difference between the gross and net weight.
• Hardy Control-Link. The instrument transmits and receives data packets on Ethernet via UDP. The instrument will transmit packets at the rate selected if any destination is defined on its destination list (see the Hardy Control Link configuration page).
• Control-Link port. This parameter determines the ethernet port that packets are sent on. Note: the instrument listens and transmits on this port. A power cycle is required to change the listening port. Legal values are 1024-1055
• Certification. If NONE, the instrument will accept a negative TARE weight. Otherwise, the unit will operate under the restrictions of selected (NTEP CC 05-111, CLASS III/IIIL -or- CANADA AM-5718C, CLASS III/IIIHD) certification.